Inspector Tools

The current suite of Inspector Tools focuses on products that determine thickness or maximum pressure (MAWP) in accordance with ASME Boiler & Pressure Vessel Code, Section VIII, Divisions 1 and 2, and Section 1; ASME B16.5 and B16.47; ASME B31.1, B31.3, B31.4, B31.8, and Section 1; and data provided by the Gas Processors Suppliers Association (GPSA) data book. This suite of products includes:
 

 
Site and corporate pricing available – please contact webtools@equityeng.com for more information


Pipe Pressure-Thickness Tool

Piping thickness, MAWP (MAOP) and MDMT calculations are determined for straight pipe, elbows and miter bends in accordance with ASME B31.1, B31.3, B31.4 and B31.8 Piping Codes for power, process, liquid transportation, and gas distribution piping, respectively. A materials database for these code is provided. Supplemental loads, i.e. forces and moments, may be specified. Two Options are provided.
 

  • Design Option – Determine the required thickness, recommended nominal thickness and MDMT given the geometry, materials of construction, design pressure, design temperature and supplemental loads
  • In-Service Option – Determine the retirement thickness, MAWP (MAOP) and MDMT given the geometry, materials of construction, nominal thickness, design temperature, supplemental loads, metal loss and corrosion allowance.

 

Pricing

  • Pricing: $250.00 per user

 
 

Purchase with Invoice

Purchase with Credit Card

Download Brochure

 


Insulation Thickness

This tool determines the insulation thickness of a component that best serves any one of following four purposes:
 

  • Limiting heat loss by specifying a heat loss threshold,
  • Preventing condensation by specifying a dew point temperature,
  • Protecting personnel by specifying a safe surface temperature, or
  • Minimizing the combined costs of heat loss and insulation.

 
Insulation thickness tables are also generated that can be used for assessing multiple components. These calculations are firmly founded on the data provided by the Gas Processors Suppliers Association (GPSA) data book, which has been diligently collecting the relevant insulation data since 1935.

 

Pricing

  • Pricing: $400.00 per user

 
 

Purchase with Invoice

Purchase with Credit Card

Download Brochure

 


ASME B16.5 PIPE Flanges

The pressure-temperature rating for a standard flange manufactured in accordance with ASME B16.5 or B16.47 is determined. The pressure-temperature rating is performed according to a specific edition of ASME B16.5 and B16.47. A materials database for these codes is provided. Three Options are provided:
 

  • Option 1 – Given a pressure, temperature and material of construction, the required ASME flange class is determined
  • Option 2 – Given a flange class, pressure and material of construction, the maximum temperature is determined
  • Option 3 – Given the flange class, temperature and material of construction, a maximum pressure is determined

 

Pricing

  • Pricing: $250.00 per user

 
 

Purchase with Invoice

Purchase with Credit Card

Download Brochure

 


Pipe Span Pressure Thickness

Calculations to determine the required thickness or MAWP (MAOP) of a pipe span are performed such that a user-specified maximum deflection and slope are not exceeded. Calculations are performed in accordance with the ASME B31.1, B31.3, B31.4 and B31.8 Piping Codes. A materials database for these codes is provided. Concentrated loads can be included and adjusted to model flange junctions, valves and the weight of a person. Distributed loads automatically included in the calculations are the weight of the pipe, insulation, and fluid contents. Longitudinal, circumferential and stress at the supports are computed in addition to pipe properties including metal cross-sectional area, section modulus, moment of inertia and weight. In the weight calculation, the additional weight due to insulation, refractory, and the fluid is accounted for. If refractory properties are input, a modified moment of inertia is computed to model the increase in stiffness due to the specified refractory thickness and its modulus of elasticity. Two Options are provided.
 

  • Design Option – Determine the required thickness and recommended nominal thickness given the geometry, materials of construction, design pressure, design temperature and applied loadings
  • In-Service Option – Determine the retirement thickness given the geometry, materials of construction, design pressure, design temperature and applied loadings

 

Pricing

  • Pricing: $250.00 per user

 
 

Purchase with Invoice

Purchase with Credit Card

Download Brochure

 


Shell Pressure-Thickness

Pressure vessel thickness, MAWP and MDMT calculations are determined for cylindrical shell, conical shell, sphere, elliptical head, torispherical head and elbow in accordance with the ASME B&PV Code, Section VIII, Divisions 1 and 2. A materials database for these code is provided. Two Options are provided.
 

  • Design Option – Determine the required thickness, recommended nominal thickness and MDMT given the shell geometry, materials of construction, design pressure and design temperature
  • In-Service Option – Determine the retirement thickness, MAWP and MDMT given the shell geometry, materials of construction, nominal thickness, design pressure, design temperature, metal loss and corrosion allowance.

 

Pricing

  • Pricing: $250.00 per user

 
 

Purchase with Invoice

Purchase with Credit Card

Download Brochure

 


Branch

Branch reinforcement calculations for integrally and pad reinforced fabricated connections (i.e. run pipes and headers) are performed in in accordance with ASME B31.1, B31.3, B31.4 and B31.8 Piping Codes for power, process, liquid transportation, and gas distribution piping, respectively. A materials database for these code is provided. Two Options are provided.
 

  • Design Option – Determine the branch design reinforcement requirements given the geometry, materials of construction, design pressure, design temperature of the run pipe (header) and the branch pipe
  • In-Service Option – Determine the branch MAWP (MAOP) given the geometry, materials of construction, design temperature, metal loss and corrosion allowance of the run pipe (header) and the branch pipe

 

Pricing

  • Pricing: $250.00 per user

 
 

Purchase with Invoice

Purchase with Credit Card

Download Brochure

 


Boiler Tubes

Boiler Tube thickness and MAWP calculations in accordance with ASME B&PV Code, Section I code calculations for boiler tubes. A materials database for these code is provided. Two Options are provided.
 

  • Design Option – Determine the required thickness and recommended nominal thickness given the geometry, materials of construction, design pressure and design temperature.
  • In-Service Option – Determine the retirement thickness and MAWP given the geometry, materials of construction, nominal thickness, design pressure, design temperature, metal loss and corrosion allowance.

 

Pricing

  • Pricing: $250.00 per user

 
 

Purchase with Invoice

Purchase with Credit Card

Download Brochure

 


Request site and corporate subscription information

 


E2G Help Desk

Our Help Desk IT specialists and engineers are available for questions about all E2G software products.
 
Our goal is to facilitate upgrades and conversions, quickly answer your questions, and help you benefit from our state-of-the-art software products.
 
Phone: 216.658.4777 – Weekdays 9am – 4pm Eastern
 
Email: helpdesk@equityeng.com